LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 ((Convergence Telematics Module - Electrical Diagnostics - 500 - Except Electric)) >> DTC Troubleshooting >> B1007-00-Internal Error - USB Unavailable >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will set if the USB bus goes into an overcurrent condition. The overcurrent condition can be caused by a fault on the USB bus or by connecting a USB device that requires more that 1.2 amps.

scientia non olet · About LEMON Manuals