Nozzle, Washer: Removal: Rear
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- Using a trim stick or another suitable wide flat-bladed tool, gently pry the rear washer nozzle (2) away from the liftgate outer panel until the latch features that secure it in the mounting hole of the panel unsnap.
- Pull the rear washer nozzle out from the liftgate outer panel far enough to access the washer supply hose (1).
- Disconnect the washer supply hose from the barbed nipple on the back of the rear washer nozzle.