Nozzle, Washer: Operation: Front
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
The two front washer nozzles are designed to dispense washer fluid into the wiper pattern area on the outside of the windshield glass. Pressurized washer fluid is fed to each nozzle from the washer reservoir by the washer pump/motor unit through a single hose, which is attached to a barbed nipple on each washer nozzle below the cowl plenum cover/grille panel. Three orifices on each washer nozzle cause the pressurized washer fluid to be emitted from the nozzle as three distinct streams to more effectively cover a larger area of the glass to be cleaned.