Resistor, Blower Motor: Description: Description
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
A blower motor resistor (1) is used on this model when equipped with the Manual Temperature Control (MTC) heating and A/C system. Models equipped with the Automatic Temperature Control (ATC) system use a power module, instead of a resistor. Refer to DESCRIPTION .
The blower motor resistor consists of a molded plastic housing with an integral wire connector receptacle (3) and resistors contained within a metal heat sink (2). The blower motor resistor is located on the right side of the HVAC housing, behind the glove box.