Section 51 (Half Shaft - 500 - Except Electric): Specifications: Specifications
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Nut, Hub | 310 | 229 | - |
| Nut, Tie Rod End to Knuckle | 40 | 39 | - |
| Nut, Strut Clevis to Knuckle | 75 | 55 | - |
| Bolt, Wheel Speed Sensor | 8 | - | 71 |
| * Bolt, Inner CV joint to Electric Drive Unit (see note) | 30 | 22 | - |
NOTE:
* THE BOLT(S) AND WASHERS MUST BE NEW. If the bolts were threaded into the flange, discard the bolts and washers. Do not reuse the bolts or washers to attach the half shaft to the Electric Drive Unit.