LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Frame And Bumpers - 500 - Except Electric) >> Under Body Protection >> Belly Pan >> Removal >> Removal

Belly Pan: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Belly Pan & Fasteners
GC0153109Courtesy of CHRYSLER GROUP, LLC

Base model shown in illustrations, other models typical unless noted.

  1. Raise and support the vehicle.
  2. Remove the six fasteners (2) from belly pan.
  3. Carefully, remove the belly pan (1) from vehicle by pulling rearward then down.