Switch, Ignition: Removal: Removal
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the and isolate the negative battery cable.
- Remove the steering column trim. Refer to SHROUD, STEERING COLUMN, LOWER, REMOVAL and SHROUD, STEERING COLUMN, UPPER, REMOVAL .
- Disconnect the aerial antenna electrical connector.
- Remove the aerial antenna ring
- Disconnect the electrical connection for the ignition switch.
- Remove the bolts head with a hammer and chisel or other suitable tool.