Injector(S), Fuel: Removal: 1.4L
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The fuel system is under constant pressure even with engine off. Before servicing fuel injector(s), fuel system pressure must be released.
NOTE:
To remove one or more fuel injectors, the fuel rail assembly must be removed from engine.
- Perform the fuel system pressure release procedure. Refer to FUEL SYSTEM PRESSURE RELEASE .
- Remove the fuel rail assembly. Refer to RAIL, FUEL, REMOVAL .
- Remove the fuel injector retaining clip(s) (2) from the fuel rail.
- Remove the injector(s) (1) from the fuel rail assembly.