LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Fuel System - 500) >> Fuel Delivery - 1.4L 16-Valve Turbo (EAF) >> Rail, Fuel >> Removal >> 1.4L

Rail, Fuel: Removal: 1.4L

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the fuel pressure release procedure. Refer to FUEL SYSTEM PRESSURE RELEASE  .
  2. Disconnect and isolate the negative battery cable.
  3. Remove engine cover.
  4. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
    Fig 1: Purge Flow Control Solenoid & Bracket
    GC0156078Courtesy of CHRYSLER GROUP, LLC
  5. Disengage and reposition the purge flow control solenoid (1) from the bracket (4).
    Fig 2: Support Brackets, Bolts, Retainers & Nuts
    GC0155583Courtesy of CHRYSLER GROUP, LLC
  6. Remove two nuts (1), bolt (7) and the purge flow control solenoid bracket (2).
    Fig 3: Fuel Purge Hose & Hose Retainer
    GC0156457Courtesy of CHRYSLER GROUP, LLC
  7. Disconnect the fuel line (1) from the fuel rail. Refer to STANDARD PROCEDURE  .
    Fig 4: Connectors & Retainers
    GC0155876Courtesy of CHRYSLER GROUP, LLC
  8. Unlock and disconnect the wire harness connectors (2) from the fuel injectors.
  9. Disengage two wire harness retainers (1) from the fuel rail and reposition the wire harness.
    Fig 5: Fuel Rail & Support Bolts
    GC0155874Courtesy of CHRYSLER GROUP, LLC
  10. Remove the two fuel rail support bolts (2).
    Fig 6: Fuel Rail, Injector & Retainer Clip
    GC0152554Courtesy of CHRYSLER GROUP, LLC
  11. Using care. Remove the fuel rail (1) with the injectors from the intake manifold.
  12. Remove the fuel injector retainer clips (2).
  13. Using care. Remove the fuel injectors (3) from the fuel rail.
scientia non olet · About LEMON Manuals