LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Cooling System - 500 - Except Electric) >> Accessory Drive >> Belt, Serpentine >> Removal >> 1.4L

Belt, Serpentine: Removal: 1.4L

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EVAP Hose Quick Release Fitting, Wastegate Solenoid Vent Hose, Clamps, Screws & Bolts
GC0155967Courtesy of CHRYSLER GROUP, LLC
  1. Remove the air cleaner assembly (1).
    Fig 2: Belt Tensioner, Pulley Center Bolt & Drive Belt Routing (1.4L)
    GC0155562Courtesy of CHRYSLER GROUP, LLC
  2. Release the serpentine belt tensioner (1) by rotating the pulley center bolt (2) counterclockwise.
  3. Remove the accessory drive belt (3).
scientia non olet · About LEMON Manuals