LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Battery Pack Control Module (BPCM) - DTCS P00B2-00 To P0C76-00 - 500 - Electric) >> DTC Troubleshooting >> P0B11-00-Hybrid/EV Battery Pack Current Sensor 2 Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

A single internal High Voltage Battery Pack current shunt sensor signal is greater than a calibrated high threshold. With one current sensor fault the EVS lamp is illuminated but vehicle operation is not affected during the current drive cycle. With two or more current sensor faults, the EVS lamp is illuminated, vehicle power is limited and vehicle is disabled at the next drive cycle.