Section 32 (Rear Suspension - 500 - Electric): Description: Description
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
The rear suspension design used on this vehicle is a twist beam trailing axle type with vertically mounted coil springs.
The rear suspension consists of these major components:
- Axle
- Coil spring (2 per vehicle)
- Hub and bearing (2 per vehicle)
- Jounce bumper (2 per vehicle)
- Shock absorber (2 per vehicle)
- Spindle (2 per vehicle)
Refer to the individual components for additional information.