Pedal And Pad, Clutch: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Raise the vehicle.

Fig 1: High Pressure Line
Courtesy of CHRYSLER GROUP, LLC
Disconnect the supply pipe from the master cylinder and plug both openings.
Lower the vehicle.
Remove the battery tray. Refer to TRAY, BATTERY, REMOVAL .

Fig 2: Supply Hose
Courtesy of CHRYSLER GROUP, LLC
Remove the supply hose from the brake master cylinder and plug both openings.

Fig 3: Clutch Start & Brake Lamp Switches
Courtesy of CHRYSLER GROUP, LLC
Disconnect the clutch start (1) and brake lamp switches (2).

Fig 4: Brake Pedal, Brake Master Cylinder & Mounting Nuts
Courtesy of CHRYSLER GROUP, LLC
Disconnect the brake pedal from the brake master cylinder.
Remove the mounting nuts and remove the pedal assembly.