LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Clutch System - 500) >> Cylinder, Clutch Slave >> Removal >> C510

Cylinder, Clutch Slave: Removal: C510

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transaxle from the vehicle.
  2. Place the transaxle on a bench.
    Fig 1: Concentric Slave Cylinder (CSC) Boot
    GC0153663Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Concentric Slave Cylinder (CSC) boot (1) from the bell housing.
    Fig 2: CSC Retention Tabs
    GC0153664Courtesy of CHRYSLER GROUP, LLC
  4. Release the retention tabs from the CSC (1).
    Fig 3: CSC Bolts
    GC0153665Courtesy of CHRYSLER GROUP, LLC
  5. Remove the CSC bolts (1).
    Fig 4: Remove/Install CSC
    GC0153666Courtesy of CHRYSLER GROUP, LLC
  6. Remove the CSC from the case.
scientia non olet · About LEMON Manuals