Cylinder, Clutch Slave: Installation: C514
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- Install the slave cylinder (2) to the transmission.
- Install the slave cylinder bolts (1) and tighten to 20 N.m (15 ft. lbs.).NOTE:
Verify O-ring is on hydraulic line.
- Install the hydraulic line to the slave cylinder. Install the clip (3).
- Bleed the hydraulic system. Refer to STANDARD PROCEDURE .
- Install the battery tray. Refer to TRAY, BATTERY, INSTALLATION .