LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Turbocharger System >> Solenoid, WASTEGATE >> Removal >> Removal

Solenoid, WASTEGATE: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Cleaner Assembly, Intake Hose, Fittings & Clamp
GC0153787Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the two vacuum fittings (4), loosen the clamp (3) at the air to turbocharger inlet tube.
  2. Disconnect the fresh air intake hose (2). Remove the air cleaner assembly.
    Fig 2: Wastegate Actuator Hose, Solenoid, Electrical Connector, Vacuum Supply Hose & Nut
    GC0156333Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical connector (3).
  4. Remove the vacuum supply (2) and wastegate actuator (1) hoses.
  5. Remove the nut (5) securing the solenoid mounting bracket to the timing cover.
  6. Remove the solenoid (4).
scientia non olet · About LEMON Manuals