LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal >> Automatic Transmission

Automatic Transmission

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lower Air Dam/Belly Pan
GC0082359Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING .
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    Fig 2: Tunnel Support Brace & Bolts
    GC0152449Courtesy of CHRYSLER GROUP, LLC
  3. Remove four bolts (1) and the tunnel support brace (2).
    Fig 3: Two Bolts Of Lower Transmission Mount
    GC0152406Courtesy of CHRYSLER GROUP, LLC
  4. Remove two bolts (4) from the rear engine mount bracket (3).
  5. Remove the bolt (1) and remove the rear engine mount isolator (5).
  6. If required, remove the two bolts (2) and the rear engine mount bracket (3).
scientia non olet · About LEMON Manuals