LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Vehicle Quick Reference - 500 - Electric) >> Hoisting >> Standard Procedure >> Jacking And Hoisting Lift Points - Gasoline >> Rear Hoist Locations

Rear Hoist Locations

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Sill Or Cladding, Rear Suspension, Underbody Protection & Flange
GC0153809Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Do not allow the hoist lift arm or lift pad to contact the body sill or cladding (1), the rear suspension (2), or underbody protection (3) or damage to the vehicle may result.

  1. Place the rear lift pads onto the sill flange (4) and carefully lift vehicle making sure there is no contact with the body side sill (1) and sill cladding.