Diagnostic Test
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EVSE CHARGING CAPABILITY
- Connect the customers EVSE charging unit to the vehicle. Using the Scan Tool, Monitor the AC output.
Is the EVSE charging unit operating correctly?
Yes
- Advise the customer that the problem may be with their power source connection for the EVSE charging unit.
- Perform the EVCU VERIFICATION TEST. Refer to EVCU VERIFICATION TEST .
No
- Go To 2
- Connect the customers EVSE charging unit to the vehicle. Using the Scan Tool, Monitor the AC output.
- CHECK EVSE CHARGING UNIT
- Refer to the EVSE User manual information and follow the troubleshooting guide to determine if the problem is with the EVSE charging unit or the vehicle.
- Using the Scan Tool, Monitor the AC output.
Is the EVSE charging unit operating correctly?
Yes
- The issue that caused the DTC to set is no longer present, test complete.
- Perform the EVCU VERIFICATION TEST. Refer to EVCU VERIFICATION TEST .
No
- Replace the EVSE charging unit in accordance with the service information.
- Perform the EVCU VERIFICATION TEST. Refer to EVCU VERIFICATION TEST .