Set Condition
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
If the module detects that the sensor input is greater than or equal to 20.5 mA for greater than 3 seconds the DTC will set. This DTC may set when the current is between 17 mA and 20.5 mA. This DTC transitions from active to stored when the module sees a recovery from the shorted to ground condition for greater then 5 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.