Module, Power Top Control, Full Open Retractable Roof: Removal: Removal

Fig 1: Rear Wind Deflector/Windscreen

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the rear wind deflector / windscreen (1) by pulling up.
   Fig 2: Rear Shelf, Bracket & Retainers

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the three fasteners securing the bracket (1) to the rear shelf (2).
4. Remove the bracket (1).
5. Remove the push pin retainers (3) from the rear shelf.
6. Remove the rear shelf.
   Fig 3: Motor Cover Plate & Rivets

   Courtesy of CHRYSLER GROUP, LLC
7. Drill out the four rivets (1) securing the motor cover plate (2) and remove the plate.
   Fig 4: Module & Motor

   Courtesy of CHRYSLER GROUP, LLC
8. Release the tab securing the module (1) to the mounting plate.
9. Disconnect the electrical connector and remove the module (1).