Sensor, Wheel Speed, Front: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheel Speed Sensor Cable Connector & Retainers

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding, refer to CAUTION and WARNING .

Raise and support the vehicle. Refer to HOISTING .
Disconnect the wheel speed sensor cable connector (1) from the wiring harness connector on the inner fender.
Separate sensor cable clips from retainers (2, 3).

Fig 2: Speed Sensor Cable Routing Clips
Courtesy of CHRYSLER GROUP, LLC
Remove the speed sensor cable routing clips (1, 2, 3) from retainers.

Fig 3: Front Wheel Speed Sensor & Fastener
Courtesy of CHRYSLER GROUP, LLC
Remove the mounting screw (1) fastening the wheel speed sensor head (2) to the knuckle. Pull the sensor head out of the knuckle and remove the wheel speed cable from the vehicle.