LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Frame And Bumpers - 500 - Electric) >> Bumpers >> Air Dam, Front >> Removal >> Removal

Air Dam, Front: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Dam, Push Pin Fasteners & Screws
GC0157714Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING .
  2. Remove ten push pin fasteners (1) from the air dam (3).
  3. Remove the two screws (2) from the air dam (3).
  4. Remove the air dam (3) from the front fascia.
scientia non olet · About LEMON Manuals