LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Frame And Bumpers - 500 - Electric) >> Bumpers >> Air Dam, Front >> Installation >> Installation

Air Dam, Front: Installation: Installation

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Dam, Push Pin Fasteners & Screws
GC0157714Courtesy of CHRYSLER GROUP, LLC
  1. Position the air dam (3) from the front fascia.
  2. Install the two crews (2) into the air dam (3).
  3. Install the ten push pin fasteners (1) into the air dam (3).
  4. Lower the vehicle.