Indicator, Battery Charge: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

It is necessary to remove the radio to access the battery charge indicator (BCI) electrical connector.

Remove the radio. Refer to RADIO, REMOVAL .
With the radio removed, reach through the opening and unplug the BCI connector.

Fig 1: Battery Charge Indicator (BCI) Removal
Courtesy of CHRYSLER GROUP, LLC
Using special tool (special tool #C-4755, Trim Stick) release the retainers at the four areas indicated (1, 2). Lift the BCI straight up and out of the dash pad.