Thrust Angle

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

If the thrust angle is only slightly out of specification, the rear suspension location can be adjusted slightly. Loosening the rear cradle to body bolts allows for small adjustment.

For negative thrust, move the left side of the axle forward and the right rearward.
For positive thrust, move the right side of the axle forward and the left rearward.

After reaching the desired rear thrust angle, tighten the three axle assembly mounting bolts to 80 N.m (59 ft. lbs.) on each side of the vehicle.