LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (1.4L 16-Valve Engine (Service Information) 500) >> Engine Block >> Damper, Vibration >> Removal >> Removal

Damper, Vibration: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wheel Lug Bolts
GC0152555Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING .
  2. Remove the right front wheel and tire assembly. Refer to REMOVAL .
    Fig 2: Right Vertical Brace, Frame Splash Shield & Fasteners
    GC0153366Courtesy of CHRYSLER GROUP, LLC
  3. Remove two bolts (4) and the right vertical brace (5).
  4. Remove two screws (2) from the front wheelhouse splash shield.
  5. Remove three screws (1) and the frame splash shield (3).
    Fig 3: Drive Belt Tensioners & Assembly With Drive Belt Routing
    GC0152365Courtesy of CHRYSLER GROUP, LLC
  6. Remove the accessory drive belt (4). Refer to BELT, SERPENTINE, REMOVAL .
    Fig 4: Vibration Damper & Bolts
    GC0152462Courtesy of CHRYSLER GROUP, LLC
  7. Remove the three bolts (2) and the vibration damper (1).
scientia non olet · About LEMON Manuals