LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (1.4L 16-Valve Engine (Service Information) 500) >> Cylinder Head >> Rocker Arm, Valve >> Removal >> Removal

Rocker Arm, Valve: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rocker Arms
GC0152613Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the variable valve actuation assembly. Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL .
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Disengage the retaining clip and remove the rocker arm(s) (1).