LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Body - Interior & Exterior - 500 - Except Electric) >> Hood >> Cable, Hood Release >> Removal >> Removal

Cable, Hood Release: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fasteners & Latch Release
GC0153128Courtesy of CHRYSLER GROUP, LLC
  1. Remove the fasteners (2) securing the interior latch release (3) and remove the release.
    Fig 2: Interior Latch Release & Cable
    GC0153129Courtesy of CHRYSLER GROUP, LLC
  2. Press the handle down on the interior latch release (2) and remove the cable (1).
    Fig 3: Exterior Latch Release & Cable
    GC0153125Courtesy of CHRYSLER GROUP, LLC
  3. Press the handle down on the exterior latch release (1) and remove the cable (2).
    Fig 4: Cable & Grommet
    GC0153126Courtesy of CHRYSLER GROUP, LLC
  4. Unclip the cable (2) from the retainer located on the inner fender panel.
  5. Pull out the grommet (1) and the cable (2) from the interior into the engine compartment.
  6. Pull the cable (2) from the latch through the front end module in the engine compartment.
  7. Remove the hood release cable (2).
scientia non olet · About LEMON Manuals