Cover, Beauty: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

Do not use any lubricants on the rubber grommets.

Fig 1: Rubber Grommets

Courtesy of CHRYSLER GROUP, LLC

Inspect the rubber grommets (1) for secure fit in the cover.
Position the beauty cover over the four mounting posts.

Fig 2: Beauty Cover Attaching Points
Courtesy of CHRYSLER GROUP, LLC
Using palm pressure, push down onto the cover at the four points (1) above the posts until fully seated.

Fig 3: Power Electronics Coolant Reservoir Return Hose & Cover Notch
Courtesy of CHRYSLER GROUP, LLC
Pinch the power electronics coolant reservoir return hose (1) and insert into the notch (2).