Reinforcement, Bumper, Rear: Installation: Installation

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bumper Reinforcement

Courtesy of CHRYSLER GROUP, LLC

Base model shown in illustrations, other models typical unless noted.

With the aid of an assistant, position the bumper reinforcement (1).

Fig 2: Bumper Reinforcement Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the fasteners securing the bumper reinforcement (1). Tighten the fasteners to 45 N.m (33 ft. lbs.). Repeat for the opposite side.
Install the rear fascia. Refer to FASCIA, REAR, INSTALLATION .