LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Pop, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Lubrication >> Sensor, Oil Temperature >> Removal >> Removal

Sensor, Oil Temperature: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner body.

    Refer to BODY, AIR CLEANER, REMOVAL .

    Fig 1: Oil Temperature Sensor Electrical Connector & Bracket
    GC0152560Courtesy of CHRYSLER GROUP, LLC
  2. Unlock and disconnect the oil temperature sensor harness connector (1).
  3. Disengage the oil temperature harness connector from the bracket (2).
    Fig 2: Remove/Install Oil Temperature Sensor
    GC0152505Courtesy of CHRYSLER GROUP, LLC
  4. Use an appropriate socket (2) and remove the oil temperature sensor (1).
    Fig 3: Oil Temperature Sensor Gasket
    GC0152506Courtesy of CHRYSLER GROUP, LLC
  5. The oil temperature sensor gasket (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals