LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Pop, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (1.4L 16-Valve Engine (Service Information) 500) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal >> Removal

Lifter(S), Hydraulic: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hydraulic Lifters
GC0152612Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL .
    NOTE:

    If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Remove the hydraulic lifter(s) (1).
scientia non olet · About LEMON Manuals