Switch, Power Top, Full Open Retractable Roof: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Header Panel & Dome Lamp Assembly

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Using a trim stick, remove the dome lamp assembly (2) from the header panel (1).

Fig 2: Header Panel, Electrical Connector, Power Top Switch & Clips
Courtesy of CHRYSLER GROUP, LLC
Through the dome lamp opening release the clips (4) securing the power top switch (3) to the header panel (1).
Disconnect the body harness electrical connector (2), and remove the switch.