Headlamp Alignment
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the headlamps ON and select the LOW beams.
- Block the light of the right headlamp.
- Rotate the left headlamp (2) vertical adjustment screw (1) to adjust the right side of the beam pattern to the lamp horizontal reference height as required.
- Block the light of the left headlamp.
- Rotate the right headlamp vertical adjustment screw to adjust the right side of the beam pattern to the lamp horizontal reference height as required.