Bezel, Instrument Panel, Lower: Removal: Removal

Fig 1: Gear Shifter Switch Bezel

Courtesy of CHRYSLER GROUP, LLC

1. Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL .
2. Using trim stick (special tool #C-4755, Trim Stick), pry the gear shifter switch bezel (1) to disengage the retaining tabs.
   Fig 2: Three Electrical Connectors

   Courtesy of CHRYSLER GROUP, LLC
3. Disconnect the three electrical connectors (1) on the bottom of the electronic shifter switch bezel.
   Fig 3: Lower Instrument Panel Bezel & Screws

   Courtesy of CHRYSLER GROUP, LLC
4. Remove the screws (1, 2) securing the lower instrument panel bezel (3).
5. Remove the lower instrument panel bezel (3) from the vehicle.