LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Easy, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Base Brakes (Service Information) 500 - Except Electric >> Hydraulic/Mechanical >> Pads, Brake, Front >> Removal >> Removal

Pads, Brake, Front: Removal: Removal

NOTE:

Before proceeding, refer to CAUTION  and WARNING  .

  1. Raise and support the vehicle. Refer to STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
    Fig 1: Anti-Rattle Clip & Caliper
    GC0158568Courtesy of CHRYSLER GROUP, LLC
  3. Remove the anti-rattle clip (1) from brake caliper (2).
    Fig 2: Caliper Guide Pin Bolts, Dust Covers, Brake Caliper & Adapter Bracket
    GC0158580Courtesy of CHRYSLER GROUP, LLC
  4. Remove dust covers from caliper guide pin bolts, if equipped.
  5. Remove the two brake caliper guide pin bolts (1).
  6. Remove the disc brake caliper (2) from the disc brake adapter bracket and hang it out of the way using wire or a bungee cord. Use care not to overextend the brake hose when doing this.
    Fig 3: Front Brake Pads
    GC0082138Courtesy of CHRYSLER GROUP, LLC
  7. Remove the brake pads (4, 5) from the caliper adapter bracket (2).
scientia non olet · About LEMON Manuals