LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Easy, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Navigation/Telecommunication (Service Information) 500 - Except Electric >> Navigation Unit >> Removal >> Mounting Cradle

Mounting Cradle

Fig 1: Navigation Screen Stand
GC0153163Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the navigation unit mounting cradle (1) by grasping it firmly and pulling it straight up out of the auxiliary port on the top of the instrument panel.