LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Easy, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Navigation/Telecommunication (Service Information) 500 - Except Electric >> Navigation Unit >> Installation >> Mounting Cradle

Mounting Cradle

Fig 1: Navigation Screen Stand
GC0153163Courtesy of CHRYSLER GROUP, LLC
  1. Align the base of the navigation unit mounting cradle (1) with the auxiliary port on the top of the instrument panel.
  2. Using hand pressure, push the mounting cradle straight downward firmly until the base is fully seated in the auxiliary port.
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals