LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 E >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Body - Interior & Exterior - 500 - Except Electric) >> Standard Procedure >> Plastic Body Panel Repair >> Adhesion Promoter/Surface Modifier

Adhesion Promoter/Surface Modifier

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Adhesion Promoters/Surface Modifiers are required for certain plastics. All three categories may have plastics that require the use of adhesion promoter/surface modifiers. Always follow repair material manufacturer's plastic identification and repair procedures.