LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2015 >> 500L Trekking, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Clutch System - 500L) >> Flywheel >> Removal >> Manual

Section 3 (Clutch System - 500L): Flywheel: Removal: Manual

WARNING: This page is about a different variant/trim than selected.
WARNING:

Chrysler LLC does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris.

Fig 1: Removing/Installing Flywheel-To-Crankshaft Bolts And Flywheel Assembly
GC0098454Courtesy of CHRYSLER GROUP, LLC
  1. Remove clutch pressure plate and disc. Refer to DISC, CLUTCH, REMOVAL .
  2. While holding the flywheel against the engine, remove the bolts (3) holding the flywheel to the crankshaft flange (1).
  3. Remove the flywheel (2) from the crankshaft.
scientia non olet · About LEMON Manuals