DDCT, Even Gears
WARNING: This page is about a different variant/trim than selected.
WARNING:
Chrysler LLC does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris.
- Install the even gear slave cylinder and bolts (1), tighten the fasteners to 10 N.m (89 in. lbs.).
- Connect the hydraulic fitting to the plastic retainer (2).
- Install the clutch assembly. Refer to DISC, CLUTCH, INSTALLATION .
- Perform the manual clutch release rod adjustment. Refer to STANDARD PROCEDURE .
- Install the transaxle assembly. Refer to INSTALLATION .