LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2015 >> 500L Pop, Standard Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Body - Interior & Exterior - 500L >> Seats, Front >> Cover, Seat Cushion, Front >> Assembly >> Assembly

Cover, Seat Cushion, Front: Assembly: Assembly

NOTE:

Passenger seat shown in illustration. Driver seat similar.

Fig 1: Hog Rings, Seat Bottom Cover & Seat Bottom Cushion
GC0153149Courtesy of CHRYSLER GROUP, LLC
  1. If necessary, install a new Occupant Detection Sensor (ODS) onto the passenger side seat bottom cushion. Refer to SENSOR, OCCUPANT DETECTION, INSTALLATION .
  2. If necessary, install a new heated seat pad onto the seat bottom cushion. Refer to PAD, HEATER, INSTALLATION .
  3. Position the seat bottom cover (1) onto the seat bottom cushion (3) and attach new hog rings (2).
    Fig 2: Seat Cushion Cover & Seat Cushion
    GC0159106Courtesy of CHRYSLER GROUP, LLC
  4. Fold the seat back cover (1) completely over to the bottom of the seat back cushion (1).
  5. Install the seat bottom cushion and cover. Refer to COVER, SEAT CUSHION, FRONT, INSTALLATION  .
scientia non olet · About LEMON Manuals