LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2015 >> 500L Pop, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body - Interior & Exterior - 500L >> Seats, Front >> Side Shields, Seat Cushion, Front >> Removal >> Removal >> Outboard Side

Outboard Side

Fig 1: Recliner Lever, Fasteners & Height Adjuster Lever
GC0158842Courtesy of CHRYSLER GROUP, LLC
  1. Using a small flat bladed tool or equivalent, remove the fastener covers from the recliner lever (1) and height adjuster lever (2).
  2. Remove the fastener (5) from the recliner lever (1).
  3. Remove the fastener (3) from the height adjuster lever (2).
  4. Remove the recliner lever (1) and the height adjuster lever (2).
  5. Remove the fastener from the rear of the side cover.
    Fig 2: Side Cover, Clip & Small Flat Bladed Tool
    GC0158839Courtesy of CHRYSLER GROUP, LLC
  6. On the front inner of the side cover (1), release the side cover clip (2) from the retainer the tab, with the use of a small flat bladed tool (3).
  7. Move the outboard side cover up and forward, releasing it from the seat.
  8. Disconnect the wiring connector from the heated seat switch, if so equipped.
  9. Remove the outboard side shied from the seat.
scientia non olet · About LEMON Manuals