Panel, C-Pillar Trim: Removal: Removal

Fig 1: Rear Shelf Panel & Support Ends

Courtesy of CHRYSLER GROUP, LLC

Remove the rear shelf panel (3). Refer to PANEL, REAR SHELF, REMOVAL .
Remove the cargo floor cover. Refer to COVER, CARGO FLOOR, REMOVAL .
Tilt the rear seats fully forward.

Fig 2: Seat Belt Cover, C-Pillar Trim, Push Pin Retainer & Fastener Cover
Courtesy of CHRYSLER GROUP, LLC
Using trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the seat belt cover (3) from the C-pillar trim (1).
Remove the push pin retainer (4) from the top of the C-pillar trim (1).
With the use of a small flat bladed or pick tool, remove the fastener cover (2).

Fig 3: Fastener & Weatherstrip Seals
Courtesy of CHRYSLER GROUP, LLC
Remove the fastener (1).
Partially remove the weatherstrip seals (2) from the rear door and liftgate opening along the C-pillar trim perimeter.

Fig 4: Seat Belt, Anchor Cover & Fastener
Courtesy of CHRYSLER GROUP, LLC
Remove the seat belt anchor cover (1).
Remove the seat belt fastener (3).
With the use of Trim Stick (special tool #C-4755, Trim Stick) or equivalent, release the C-pillar trim retaining clips.
Route the seat belt (2) through the opening on the C-pillar trim.
Remove the C-pillar trim from the vehicle.