Bezel, Instrument Panel, Heating And A/C: Removal: Removal

Fig 1: Floor Console

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL .
   Fig 2: Instrument Cluster Bezel

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
4. Remove the radio and radio controls. Refer to RADIO, REMOVAL .
   Fig 3: HVAC Bezel & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
5. Remove the two upper fasteners (1) from the HVAC control bezel.
   Fig 4: Bezel & Fastener

   Courtesy of CHRYSLER GROUP, LLC
6. Remove the lower fastener (2).
7. Pull rearward on the bezel (1) to release the inner retainers.
   Fig 5: HVAC Control Bezel & Multi Media Port

   Courtesy of CHRYSLER GROUP, LLC
8. Disconnect the wiring connectors from the multi media port (1).
9. Remove the HVAC control bezel (2) from the vehicle.