Diagnostic Test

VERIFY THAT DTC B142A-4B-RADIO UNIT HIGH TEMPERATURE - OVER TEMPERATURE. 

1. With the scan tool, erase the Audio DTCs.
2. Start the engine and allow the engine to reach normal operating temperature.
3. If the vehicle has been in the hot sunlight or extreme cold, move the vehicle indoors and open the doors to allow the inside temperature to stabilize.
4. The Radio should operate between -23°C and 85°C (-10°F and 185°F).
5. With the scan tool, read the DTCs.

   Does the scan tool display, B142A-4B-RADIO UNIT HIGH TEMPERATURE - OVER TEMPERATURE?

   Yes 

   • Replace the Radio in accordance with the Service Information.
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

   No 

   • Test Complete.