C635 DDCT Transmission

Remove the engine and transmission from the vehicle. Refer to REMOVAL .
Remove the transmission from the engine. Refer to REMOVAL .

Fig 1: Starter Assembly, Connector & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the starter assembly (5). Refer to STARTER, REMOVAL .
Remove the dual mass flywheel. Refer to FLYWHEEL, REMOVAL .

Fig 2: Transmission Adapter Plate & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove three bolts (3 and 4), one bolt and nut (2) and remove the transmission adapter plate (1).
Drain the engine oil. Refer to OIL, STANDARD PROCEDURE .

Fig 3: Oil Pan Flange Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove fourteen bolts (1) and two nuts (2) from the flange of the oil pan.
Using the four indicated pry points, carefully remove the oil pan.

Fig 4: Oil Pan Sealant Locations
Courtesy of CHRYSLER GROUP, LLC
Remove all residual sealant (1) from the oil pan, engine block, oil pump and rear seal retainer. Refer to PAN, OIL, CLEANING .