Lamp, Cargo: Removal: Bulb
Courtesy of CHRYSLER GROUP, LLC
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the cargo lamp from the vehicle. Refer to LAMP, CARGO, REMOVAL .
- Disengage the end of the lamp lens (3) with the latch feature from the retention pin on each side of the lamp hood (1).
- Pivot the lens up from over the hood.
- Unfold the lamp hood from the lamp socket (4) far enough to access the bulb (2).
- Pull the base of the bulb straight out of the socket.