LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2015 >> 500 Turbo, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L 16-Valve Turbo Engine (Service Information) 500 >> Engine Block >> Rod, Piston And Connecting >> Standard Procedure >> Connecting Rod Side Clearance >> Feeler Gauge

Feeler Gauge

Fig 1: Connecting Rod Side Clearance
GC0121442Courtesy of CHRYSLER GROUP, LLC
NOTE:

Typical four cylinder engine shown in illustration.

  1. Slide a snug-fitting feeler gauge between the connecting rod and crankshaft journal flange. Compare the measured side clearance to the specification. Refer to ENGINE SPECIFICATIONS .
  2. Repeat this procedure for each connecting rod. Rotate the crankshaft for connecting rod accessibility.
scientia non olet · About LEMON Manuals